2015

60. K. M. Song and Y.-S. Cho, “A parametric study of the confined spraying distance, solution concentration, and spraying time for the spraying technique used to fabricate PS superhydro-phobic surfaces,”  Journal of Mechanical Science and Technology, 29, 12, 5335-5343 (2015).

59. K. M. Song, S. H. Ahn and Y.-S. Cho, “Fabrication of a Hierarchical Aluminum Oxide Surface with Micro/Nanostructures via a Single Process and Its Application as a Superhydrophobic Surface: Simple Sintering Method with an Aluminum Microsized Powder,” Surface and Coatings Technology, 282, 68-77 (2015).

58. D. G. Sohn, M. W. Hong, Y. Y. Kim and Y.-S. Cho, “Fabrication of dual-pore scaffolds using a combination of WNM (wire-networked molding) and NIPS (non-solvent induced phase separation) techniques,” Journal of Bionic Engineering, 12, 565-574 (2015).

57. A Ra Jo, M. W. Hong, Y.-S. Cho, K. M. Song, J. H. Lee, D. Sohn, Y.-Y. Kim and Y.-S. Cho, “Assessment of cell proliferation in knitting scaffolds with respect to pore-size heterogeneity, surface wettability, and surface roughness,” Journal of Applied Polymer Science, 132, 42566 (2015).

56. H.-K. Kim and Y.-S. Cho, “Fabrication of a superhydrophobic surface via spraying with polystyrene and multi-walled carbon nanotubes,” Colloids and Surfaces A: Physicochemical and Engineering, 465, 77-86 (2015).

55. K. D. Seo, D. S. Kim and S. Sánchez, "Fabrication and applications of complex-shaped microparticles via microfluidics", Lab Chip, 15, 3622-3626 (2015).

54. K. D. Seo, B. K. Kwak, Samuel Sánchez, D. S. Kim, "Microfluidic-Assisted Fabrication of Flexible and Location Traceable Organo-Motor", IEEE Transactions on NanoBioscience, 14(3), 298-304 (2015).

53. A. R. Jung, R. Y. Kim, H. W. Kim, K. R. Shrestha, S. H. Jeon, K. J. Cha, Y. H. Park, D. S. Kim, J. Y. Lee, "Ae Ryang Jung, Richard Y Kim, Hyung Woo Kim, Kshitiz Raj Shrestha, Seung Hwan Jeon, Kyoung Je Cha, Yong Hyun Park, Dong Sung Kim, Ji Youl Lee", Tissue Engineering Part A, 21, 13-14, 2115-2124 (2015).

2014

52. J.J. Lee, H.-H. Park, K.-B. Choi, G.H. Kim, H.J. Lim, “Fabrication of hybrid structures using UV roll-typed liquid transfer imprint lithography for large areas”, Microelectronic Engineering., 127, 72-76 (2014).

51. J.H. Ryu, S.-H. Lee, H.J. Lim, H.-H. Park, J.J. Lee, “Study of air bubble generation and its minimization during dispensing based ultraviolet nanoimprint lithography (UV-NIL)", Microelectronic Engineering, 123, 131-135 (2014).

50. S.-H. Lee, J. H. Lee and Y.-S. Cho, “Analysis of Degradation Rate for Dimensionless Surface Area of Well-Interconnected PCL Scaffold Via in-vitro Accelerated Degradation Experiment,” Tissue Engineering and Regenerative Medicine, 11, 446-452 (2014).

49. Y. S. Cho, M. Hong, S.-Y. Kim, S.-J. Lee, J. H. Lee, Y. Y. Kim and Y.-S. Cho, “Fabrication of dual-pore scaffolds using SLUP (salt leaching using powder) and WNM (wire-network molding) techniques”, Materials Science Engineering C: Materials for Biological Applicaitons, 45, 546-555 (2014).

48. Y. S. Cho, Myoung Wha Hong, Young Yul Kim and Y.-S. Cho, “Assessment of Cell Proliferation in Salt-Leaching Using Powder (SLUP) Scaffolds with Penetrated Macro-pores,” Journal of Applied Polymer Science, 40240 (2014).

47. Y. S. Cho, B.-S. Kim, H.-K. You and Y.-S. Cho, “A novel technique for scaffold fabrication: SLUP (salt leaching using powder),” Current Applied Physics, 14, 371-377 (2014).

46. A Ra Jo, M. W. Hong, J. H. Lee, Y.-Yul. Kim, and Y.-S. Cho, “Fabrication of Cylindrical PCL Scaffolds Using a Knitting Technique and Assessment of Cell Proliferation in the Scaffolds,” Tissue Engineering and Regenerative Medicine, 11, 16-22 (2014).

45. Y. m. Kim, S.-J Lee, K. J. Lee, S. D. Shim, J. Y. Kim, H. W. Lee, and D. H. Choi, "Self-Assembled Plasmonic Nanoparticles on Vertically Aligned Carbon Nanotube Electrodes via Thermal Evaporation", ACS Applied Materials & Interfaces, 6, 20423-20429 (2014).

44. K. D. Seo and Dong Sung Kim, "Microfluidic synthesis of thermo-responsive poly(N-isopropylacrylamide)–poly(ethylene glycol) diacrylate microhydrogels as chemo-embolic microspheres", Journal of Micromechanics and Microengineering, 24 085001 (2014).

43. K. D. Seo, J. M. Park, H. Jeong & D. S. Kim, "An experimental investigation of mixing of carbon nanotube/polymer composite in a batch-type screw mixer", Microsystem Technologies, 20, 243–250 (2014).

42. K. J. Cha, M.-H. Na, H. W. Kim, D. S. Kim, "Nano Petri dishes: a new polystyrene platform for studying cell-nanoengineered surface interactions", Journal of Micromechanics and Microengineering, 24(5), 055002 (2014).

41. M. La, W. Kim, W. Yang, H. W. Kim, D. S. Kim, "Design and numerical simulation of complex flow generation in a microchannel by magnetohydrodynamic (MHD) actuation", International journal of precision engineering and manufacturing, 15(3), 463-470 (2014).

2013

40. G. Kim, M. Jeong, H.-H. Park, H.J. Lim, J.J. Lee, “A New Mold Structure to Replicate Patterns Over 1 μm in Depth for Substrate Conformal Imprint Lithography”, NANOSCI. NANOTECHNO, 13, 8036-8040 (2013).

39. S.-H. Lee, A Ra Jo, G. P. Choi, C. H. Woo, S.-J Lee, B.-S. Kim, H.-K. You and Y.-S. Cho, “Fabrication of 3D Alginate Scaffold with Interconnected Pores using Wire-Network Molding Technique,” Tissue Engineering and Regenerative Medicine, 10, 53-59 (2013).

38. Y.-S. Cho, S. H. Ahn and S.-H. Lee, “Fabrication and Analysis of PMMA, ABS, PS, and PC Superhydrophobic Surfaces Using the Spray Method”, Journal of the Korean Physical Society, 63, 218-224 (2013).

37. D. Sohn, J. Han, Y.-S. Cho and S. Im, “A finite element scheme with the aid of a new carving technique combined with smoothed integration”, Computer Methods in Applied Mechanics and Engineering, 254, 42-60 (2013).

36. G. P. Choi, D. Sohn, C. H. Woo, S.-H. Lee, S. H. Ahn and Y.-S. Cho, “Qualitative verification of the dispersion level in nano-composite and its application to YD-128/MWCNT composite to assess the wear characteristics with respect to the dispersion level”, Journal of Mechanical Science and Technology, 27, 3131-3138 (2013).

35. K. D. Seo, J. Doh and D. S. Kim, "One-Step Microfluidic Synthesis of Janus Microhydrogels with Anisotropic Thermo-Responsive Behavior and Organophilic/Hydrophilic Loading Capability", Langmuir, 29, 49, 15137–1514 (2013).

34. K. Han, S. Lee, K. D. Seo, S.-U. Choi, J. Lee, J. Lee, B. K. Kwak, H.-J. Choi and D. S. Kim, "Effect of Flow Rates on Generation of Monodisperse Clay–Poly(N-isopropylacrylamide) Embolic Microspheres Using Hydrodynamic Focusing Microfluidic Device", Japanese Journal of Applied Physics, 50 06GL12 (2013).

33. H. W. Kim, S. J. Park, B.-K. Lee, D. S. Kim, "Versatile graphene nanocomposite microheater patterning for various thermoplastic substrates based on capillary filling and transfer molding", Applied Physics Letters, 102(10), 101907 (2013).

32. M, J, Choi, K. J. Cha, H. W. Kim, M.-H. Na, B.-K. Lee, W. Hwang, D. S. Kim, "Microchamber/nanodimple polystyrene surfaces constructing cell aggregates fabricated by thermoset mold-based hot embossing", Microelectronic engineering, 110, 340-345 (2013).

2012

31. H.J. Lim, J.J. Lee, S. Park, K.B. Choi, H.-H. Park, J.H. Ryu, “Replication of a Thin Polydimethylsiloxane Stamp and Its Application to Dual-Nanoimprint Lithography for 3D Hybrid Nano/Micropatterns”, J. NANOSCI. NANOTECHNO., 12, 5489-5493 (2012).

30. H.-H. Park, H.J. Lim, S.H. Lee and J.J. Lee, “Fabrication of an adhesion-free transparent roll stamp for large area patterning using ultraviolet-type roller nanoimprint lithography”, J. Vac. Sci. Technol., 30, 06FB11 (2012).

29. H.-H. Park, S. Park, H. Kim, H.J. Lim, D.-P. Kim and J.J. Lee, “Non-sticky polyvinylsilazane stamp with high durability for UV-nanoimprint lithography”, Microelectronic Engineering, 98, 130-133 (2012).

28. C. H. Woo, T. Y. Kim, S.-H. Lee, G. P. Choi, S. -J Lee, B.-S. Kim, H.-K. You, and Y.-S. Cho, “Development of a Novel Technique for Scaffold Fabrication and its Characterizations: Wire-Network Molding (WNM) Technique”, Tissue Engineering and Regenerative Medicine, 9, 65-72 (2012).

27. D. Sohn, Y. -S. Cho and S. Im, “A novel scheme to generate meshes with hexahedral elements and poly-pyramid elements: The carving technique” Computer Methods in Applied Mechanics and Engineering, 201-204, 208-227 (2012).

26. H.-W. Kang, Y.-S. Jeong, S.-J Lee, K.-S. Kim and W.-S. Yun, "Development of a compact micro-stereolithography (MSTL) system using a Blu-ray optical pickup unit," Journal of Micromechanics and Microengineering, 22, 115021 (2012).

2011

25. D. Sohn, J. H. Lim, Y.-S. Cho, J. H. Kim, S. Im, “Finite element analysis of quasistatic crack propagation in brittle media with voids or inclusions”, Journal of Computational Physics, 230, 6866-6899 (2011).

24. K. S. Kang, S.-J Lee, H. Lee, W. Moon & D.-W. Cho, "Effects of combined mechanical stimulation on the proliferation and differentiation of pre-osteoblasts", Experimental & Molecular Medicine, 43, 367-373 (2011).